Rental

Rental pumps

Turoteknikk has more than 50 rental pumps in stock. If you cannot find the pump you are looking for here, please contact us.

Grindex Salvador

Electric submersible sludge pump

Electric submersible drainage pump – 230 V 3-phase

Capacity	Up to approx. 93 l/s (approx. 335 m³/h), max approx. 40 m head
Speed	2905 RPM
Power	18 kW (max 20 kW)
Electrical	230 V 3-phase, 56 A
Connection	6" hose
Solids	12 mm
Seal	Double mechanical seal in oil chamber
Material	Aluminium and stainless steel, Hard-Iron impeller
Cable	20 m, 4G10 mm²
Limitations	Max 20 m submersion, max 40 °C, pH 5–8
Weight / Height / Diameter	131 kg / 954 mm / 395 mm

Self-priming centrifugal pump – 2 units

Self-priming centrifugal pump on frame – 2 units

Model	Gorman-Rupp 82H65-B (80 Series)
Design	Horizontal, self-priming, on base frame with coupling and electric motor
Capacity	Approx. 36 m³/h x 40 m
Speed	2900 RPM (50 Hz)
Suction / discharge flange	DN100 / DN80
Seal	Single mechanical seal
Material	Complete pump in stainless steel CD4MCu
Solids	19.1 mm
Temperature	Max 71 °C
Electric motor	7.5 kW, 230/400 V, 2-pole, B3, IP55
Power	230 V, 32 A plug
Control	Danfoss VLT AQUA Drive frequency converter (230 V), variable speed control
Setup	Frame with frequency converter, main switch and knife gate valve
Weight / dimensions	270 kg / L 140 x H 150 x W 40 cm
Suitable for	Thin liquids with few particles. Not for explosive atmospheres or flammable liquids.

Air-operated diaphragm pump

Max. solids passage	28.5 mm
Max. suction lift	6.1 m
Material	GG25, Viton lined, Viton elastomers
Capacity	6 m³/h x 10 m
Design	Horizontal, self-priming
Suction / discharge flange	DN65 PN10 / DN65 PN10

For rent or sale

Capacity	100 m³/h @ 100 m
Design	Self-priming horizontal on base plate with motor
Suction / discharge flange	DN100 / DN100
Speed	3500 RPM
Seal	Mechanical seal
Material	Bronze 85-5-5-5, shaft AISI 420
NPSHr	3 mvs
Electric motor	280M2, 440/60Hz, 86 kW, 3500 RPM, IP55, B3